Table of Contents
Advertisement
Settings and Measurement
3.3 Operation Modes
You can check the system operation status in the simplified message display.
Operation
Free Running
Capturing
Capturing and
Replaying
Replaying
Operation status transition
[ REVIEW ] key
(1) Free Running
When in Free Running status, you primarily set up the system to capture data.
You can check the current input signal as a waveform or digital values.
Operations available during Free Running
Measuement parameters settings
SPAN/TRACE/POSITION
Display mode
File operations
Replay of last data (captured last time) The REVIEW key is used to replay captured data.
Data replay
3-14
Operation
Start up status or data is not being
captured
Data is being captured in the main
memory or USB device.
Data being captured is being replayed
Captured data is being replayed
[ START/STOP ] key
Capturing
[ QUIT ] key
Capturing and Replaying
The MENU key is used to change various setting items in configuration menus.
The SPAN/TRACE/POSITION key is used to change settings.
The DISPLAY key is used to change the display mode.
The FILE key is used to perform file-related operations.
The FILE key is used to select data that you want to replay and replay it.
Free Running
Capturing to Internal RAM, Capturing to Internal Flash
Memory, Capturing to USB memory
Capturing and Replaying
Replaying from Internal RAM, Replaying from Internal
Flash Memory, Replaying from USB Memory
[ REVIEW ] key
Free Running
[ START/STOP ] key
When capture ends, the screen
automatically switches to the
replay screen.
Operation
Replaying
* Data cannot be replayed just after
power-on or no data has yet been
captured.
Advertisement
Table of Contents
