Coupled Markers (Na Mode) - Keysight Technologies FieldFox N9912A104 User Manual

Data Analysis Features
All about Markers

Coupled Markers (NA Mode)

Coupled Markers, available in NA mode only, allows you to simultaneously
create and move markers that have the same number for all traces. For
example, when marker 2 is created on a trace, a marker 2 is created for ALL
traces. When any marker 2 is moved, they all move together to the same
X-axis position.
— Coupled markers are allowed only in NA mode and are relevant only in
— All markers are either coupled or uncoupled. There can NOT be one marker
— Peak functions move the marker to the peak on the active trace, while all
Figure 16-3 Coupled Markers move on ALL traces at the same time.
How to create Uncoupled Markers
Markers are coupled by default.
To create markers that are NOT coupled (move independently on each trace):
— Press Marker.
— Then More.
— Then
Keysight N9912-90001 User's Guide
multi-trace configurations.
coupled and another uncoupled
other markers move to the same X-axis position.
Coupled Markers OFF
.
.
16- 5