Table of Contents
Advertisement
System Settings
System Configuration
— When the installation is completed, the FieldFox reboots.
How to backup files
This procedure backs up your user data to a USB or SD card. See also
restore files" on page
If you backup multiple versions of the user files, the FieldFox appends a
"_#" to each subsequently stored file. During restore, the file with the
highest appended number is loaded into the FieldFox.
From the initial Installer menu:
— Press
— Then
— A message is displayed: "Choose backup file location."
— Then choose either
— A progress bar and a message is displayed: "Saving user data..."
— Press
Installer menu.
How to restore files
This procedure restores user files from a USB or SD card. See also
files" on page 18-21
Restoring files overwrites the existing user data on the FieldFox.
If you backup multiple versions of the user files, the FieldFox appends a
"_#" to each subsequently stored file. During restore, the file with the
highest appended number is loaded into the FieldFox
If your stored any user files to a USB or SD card, this procedure restores those
files.
From the initial Installer menu:
— Press
— Then
Installer menu.
Or
Press
Keysight N9912-90001 User's Guide
18-21.
Utility
Backup Data
SD Card
Cancel
to exit without backing up your files and returning to the initial
.
Utility
Cancel
to exit without restoring your files and returning to the initial
Restore Data
or
USB
"How to
"How to backup
18- 21
Advertisement
Table of Contents
