Table of Contents
Advertisement
System Settings
System Configuration
How to Update Date and Time using Internet
This method of setting the Date and Time does NOT have the security
restrictions of the other methods (listed below).
This method will NOT set the correct Time Zone. You must do that using the
manual method. See below.
— Press System 7.
— Then
— Then More.
— Then
— Connect a LAN cable that is also connected to the Internet.
— Then press
displayed indicating the amount of time correction that occurred.
— Optional: Set the following when a Proxy server is used to connect to the
internet:
How to MANUALLY set Date and Time, Format, and Time Zone
Because of licensing security, the manual and GPS Sync methods to set
Date and Time are restricted as follows:
Can be set backward no more than 5 hours at a time.
Can be set forward any amount of time.
Can be set backward or forward no more than once in a day. A new day
begins at midnight.
The GPS Sync setting has the same restrictions.
There is no restriction for setting the Time Zone.
To change the Date and Time backward a significant amount, send an
email to ctd-soco_support@keysight.com.
BEFORE manually setting the Date and Time, be absolutely certain that the
Time Zone setting is correct.
— Press System 7.
— Then
— Then
— Press the
Keysight N9912-90001 User's Guide
System
Configuration.
Update Time using
Update Time using
— Proxy Host – Enter the name of the proxy host.
— Proxy Port – Enter the port number of the proxy host.
System
Configuration.
Date and
Time.
arrows to highlight the row to be edited.
Internet.
Internet. When successful, a message is
18- 17
Advertisement
Table of Contents
