Keysight Technologies FieldFox N9912A104 User Manual page 165

Interference Analyzer (SA Mode) – Option 236
Spectrogram and Waterfall Displays
About State and User Tags
When any of the State settings (listed above) are changed during a recording,
a 'state tag' is inserted at the first trace number to be recorded with the new
setting.
In addition, you can insert a 'User Tag' at any time during a recording session
to indicate an external event, such as when an antenna is moved. During
playback, you can move quickly to any of these tags, or scroll through these
tags.
A symbol is used on the screen annotation to distinguish a User Tag from a
State Tag when scrolling through tags during playback.
Screen Annotation
During a record or playback session, the following is displayed in the top-left
area of the screen:
— AutoSession02: 92/95 (state 4/5)_*_
Sep.22.2009 09:15:15 AM
where:
— AutoSession
auto-generated number, incremented with each new session. The name
can be changed using Manage Sessions. Learn more in
on page
— 92/95
traces.
— state 4/5
tags.
— * (Asterisk) indicates that a state has changed.
User Tag has been inserted.
— Sep.22... is the date and time of recording.
When GPS is enabled`, the current location and elevation are annotated at the
bottom of the playback display. Learn more in
If Recording or Playback is not occurring when you think it should, check
the following:
— Is the sweep in HOLD? (upper-left annotation)
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration settings.)
How to Record a Session
— Press Trace 6.
Keysight N9912-90001 User's Guide
is an auto-generated name for sessions.
9-14.
is the current and total trace number: currently trace is 92 of 95 total
is the current and total state tag or user tag number: 4 of 5 total
02 is the
"Manage Sessions"
# (Pound) indicates that a
.
"GPS" on page 12
9-9