Power Button Led Status; Fieldfox High Temperature Protection; How To Monitor The Internal Fieldfox Temperature - Keysight Technologies FieldFox N9912A104 User Manual

Preparing for Initial Use of Your New FieldFox

FieldFox High Temperature Protection

— To turn Power OFF (very low battery drain), press and hold the power
— To restart FieldFox, press the power button and press Restart. See the Note
— Press
— You can also access the power down softkey menu choices
— Press Mode.
— You can make a setting to automatically Power ON the FieldFox when a

Power Button LED Status

Solid green
Blinking green
Blinking amber
Blinking amber and green
Not lit
FieldFox High Temperature Protection
The following features prevent degradation or damage in the event of high
internal temperatures in the FieldFox.
Do NOT store the FieldFox in the soft-case while powered ON or in
Standby mode.

How to monitor the internal FieldFox temperature:

— Press System, then
— Then
2- 4
button. Data and instrument state are NOT automatically saved when the
FieldFox is powered OFF. Learn how to save data and instrument state in
Chapter 17, "File Management", on page
concerning Shut down.
above concerning Restart.
Cancel to exit the power down sequence.
down, Restart, and Cancel) by using the Mode hardkey:
—Then More.
—Then Shut down.
power source is connected. Learn how on
Service
Internal Temperatures.
17-1. See the Note above
"Power ON" on page 18-19
Power is ON
FieldFox in Stand By mode
Battery charging
Stand By mode and battery charging
Power is Off and battery is not charging
Diagnostics.
Keysight N9912-90001 User's Guide
(Stand by, Shut
.