Table of Contents
Advertisement
Front Panel Operations
Setting Up Keysight E5260/E5270
To Set GPIB Address
1. Press the
key.
Menu
2. Move the cursor to CONFIG, then press the
3. Move the cursor to ADDRESS, then press the
4. Press the arrow keys to set the GPIB address.
5. Press the
key to make the setup effective, or press the
Enter
changing the setup.
6. Press the
key twice to close the setup menu.
Exit
To Set Remote Display Mode
This instruction enables or disables the data display in the GPIB remote condition.
See
"RMT_DSPL" on page
1. Press the
key.
Menu
2. Move the cursor to RMT_DSPL, then press the
3. Press the arrow keys to set the remote display mode ON or OFF.
4. Press the
key to make the setup effective, or press the
Enter
changing the setup.
5. Press the
key to close the setup menu.
Exit
To Return to Local Mode
Press the
key. If the front panel keys are locked, send the KLC command from
Local
an external computer, then press the
5-14
Enter
Enter
4-24.
key.
Local
Keysight E5260/E5270 User's Guide, Edition 6
key.
key.
key to cancel
Exit
key.
Enter
key to cancel
Exit
Advertisement
Table of Contents
