Interference Analyzer (SA Mode) – Option 236
Spectrogram and Waterfall Displays
— Then
— Optionally set resolution (points). Learn how in
can NOT be changed after a session is opened.
— Then either:
— Then
— Then Record.
REC
During recording, choose from the following:
—
Pause Resume
incoming trace continues to sweep. Press again to continue recording.
—
Stop
—
User Tag
allows you to quickly move to this location during playback. Learn more in
"About State and User Tags" on page
How to Playback a Session
— Press Trace 6.
— If the session is already open, skip the following step. Otherwise:
— Then
— Then
— Then Play.
PLAY
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
Pause Resume
9- 10
Record Playback
Setup.
—
New Session
OR
—
Recall Session
then
Recorder
Player.
is displayed in the left of screen graticules.
Temporarily halts recording until pressed again. The
Immediately stops recording. Then choose from the following:
— Press
Play
to start replaying the recording from the beginning.
— Press
Record
to continue recording.
Press to insert a User Tag at the current recorded trace. This
Record Playback
Setup.
— Press
Recall Session
Open.
Recorder
Player.
is displayed in the left of screen graticules during playback. When the
Temporarily halts playback. Then choose from the following:
—
Pause Resume
Press to continue playing.
"Points" on page
Open
and select a session.
9-9.
Then select a session to playback and press
Keysight N9912-90001 User's Guide
8-27. This