Channel Scanner (SA Only and Option 312)
How to Set Up Channel Scanner
3. Press
4. To begin recording: Press
5. Optional:
6. When done press
7. Press
8. Press
Playing a Recorded Log and Viewing the Spectrogram
To play the log results:
1.
2. Then choose:
3. Press
To pause the log play:
1. Optional: Press
2. Then choose:
Keysight N9912-90001 User's Guide
—
Time Interval
1 sec to 3,000 seconds or
—
Distance Interval
— When done, press
Save Recall Rec-Playback
If Auto Save is On (default) Measurements are stored automatically
accorded to the specified time or distance interval values. Refer to step 5.
Auto Save
ON (default)—When Auto Save is on, during
recording, the FieldFox stores intermediate results in a temporary file. If
the power fails during recording you can retrieve the results. Select
Log
File. Select the temporary file name.
Press
Record Settings
Stop
file name where the file results will be stored.
Done
Back
PressRData Logginge>>Play
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
—
Position
results. Recording must be Paused to use Position.
—
Red Limit
—
Blue Limit
Stop
or
Esc
to exit the log recording.
Pause Resume
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
—
Position
results.
—
Red Limit
from 1m to 10 km
Back
>
File Type
CSV or KLM
Record
>
Auto Save On Off
or Esc. The files save dialog is displayed. Edit the
to change the position along the time record's
to change the color bar.
to change the color bar.
to pause or resume the log recording.
to change the position along the time record's
to change the color bar.
Recall
13