Distance Units; Window Layout; Transform Window - Keysight Technologies FieldFox N9912A104 User Manual

Time Domain – Option 010
Time Domain (Transform) Settings
— Then choose from:
Zero (0) seconds is always the calibration reference plane. Negative values
are useful if moving the reference plane.

Distance Units

When markers are present on a Time Domain trace, marker X-axis values are
shown both in units of time (seconds) and distance. Select the units in which
the marker distance data is presented.
Distance Units are also used when setting Time Domain Line Loss. Learn more
in "Line Loss and Velocity Factor" on page
Choose from: m (meters), or Feet.

Window Layout

This setting is used to create additional traces, or select a new layout for traces
that are already created,
Choose from: x1, x2, x2H, x3H, x4H.
Learn more about

Transform Window

There are abrupt transitions in a frequency domain measurement at the start
and stop frequencies, causing overshoot and ringing in a Time Domain
response. The Window setting reduces the abruptness of the frequency domain
transitions. This causes you to make a trade off in the Time Domain response.
6- 6
— Start Sets the transform start time that is displayed on the FieldFox
screen.
— Stop Sets the transform stop time that is displayed on the FieldFox
screen.
"Multi-Trace Configurations" on page
6-7.
5-4.
Keysight N9912-90001 User's Guide