Table of Contents
Advertisement
Channel Scanner (SA Only and Option 312)
How to Set Up Channel Scanner
Figure 15-12
Indoor Display Colors
Step 4: Enable Data Logging and Record Results
Data logging records your data with a timestamp and GPS stamp (refer to
"GPS" on page
GPS stamp.
Features
— Log files contain measured channel results including timestamps and/or
— Data results can be logged
— Data results can be saved to a *.CSV or *.KML file. Refer to
— User specifies how often results are stored.
Procedure
1. Press
2. Press
12
18-12). GPS must be enabled for the log results to include a
distance stamps.
— Timestamps are included in log files with or without GPS.
— GPS must be enabled for log results to include distance stamps.
the Log Results:" on page
— Time: Store results every "n" seconds
— Distance: Store results every "n" meters. GPS must be enabled to
store results by distance.
Measure
>
Data Logging
(default)
Interval Type
>
15-14.
>
Record Settings
Time
or
Distance
then:
Keysight N9912-90001 User's Guide
"Save 5: Save
>
Meas Interval ON
Advertisement
Table of Contents
