Table of Contents
Advertisement
System Settings
Service Diagnostics
Internal Temperatures
Learn about the importance of the internal FieldFox temperatures in
High Temperature Protection" on page
Erase User Data
All data that you have written to the FieldFox can be erased with the press of a
button. You would do this if your FieldFox is located in a secure environment
and must be routinely erased of sensitive data.
All data is deleted from the FieldFox internal "UserData" partition. This
includes all State files and Trace + State files (*.sta), all Data files (*.csv, *.snp),
all Picture files (*.png), all Cal Kit files, and all Cable files.
External media that is inserted (mini-SD card or USB flash drive) is NOT
erased.
The "Lost Clusters" folder and files are NOT erased because they are part of the
file system housekeeping.
How to Erase User Data
— Press System 7.
— Then
— Then Advanced.
— Then
— Then
— Then the following occurs:
Rebooting is not required on the N9912A units with serial number prefixes
≥5607 models.
Keysight N9912-90001 User's Guide
Service
Diagnostics.
Erase User
Data.
Confirm
Erase.
— All data files and folders are deleted from the "UserData" partition.
— A large file of 0s is written to all of the free blocks on the partition.
— The large file is deleted. All blocks released by deleting this file are
now available for use.
— The FieldFox is rebooted, which manages the newly-freed data and
re-writes the factory cal kits and cable files.
2-4.
"FieldFox
18- 23
Advertisement
Table of Contents
