Keysight Technologies FieldFox N9912A104 User Manual page 171

Interference Analyzer (SA Mode) – Option 236
Spectrogram and Waterfall Displays
— Then
— Then choose from the following:
Record Playback Example
The following "Interval Recording" example shows how you can record spectral
activity over a longer period of time with less trace storage.
— Press Trace 6 then, with
— Then
— Then
— Then
— Then
— Then
— Then Back.
— Then
— Then
trace is recorded and the Max Hold processing is reset for the next 10
second record interval.
— Then
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as
it was recorded.
— Press Trace 6 then with
Keysight N9912-90001 User's Guide
— SD Card An external SD Card (must be inserted).
— USB An external USB flash drive (must be inserted).
Manage Sessions.
— Name Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available
number. Learn more in
page 17-5.
— Sort Arrange the listing of sessions
— Delete After a confirmation prompt, removes the contents of the
selected session from the list.
— Copy Copies the selected session to a different storage device, or the
same storage device with 'Copy_' appended to the beginning of the
name so that duplication is prevented.
— Copy All Copies ALL of the listed sessions to a different storage
device, or the same storage device with 'Copy_' appended to the
beginning of the names so that duplication is prevented.
Trace
Record Playback Setup.
New Session.
Recording Configuration.
Record Source to Trace.
Record Interval to 10
Recorder Player.
Record At the end of each 10 second record interval, the Max Hold
Stop to end the recording.
Trace
"Set File Type and Select Device" on
by Name,
= 1, press State then
s (seconds).
= 1 and press State
by Date, or by Size.
Max Hold
then Clr/Wr.
9-15