Marker Search - Keysight Technologies FieldFox N9912A104 User Manual

Pulse Measurements Mode – Option 330
Pulse Measurement Settings
— Press
— Then choose from the following:

Marker Search

Use Marker Search to find and move markers to locations on the Tr 1 trace.
How to Search with Markers
— Activate the marker to be used for the search
— Then press Mrk ->/Tools.
— Then
— Then
— Then choose from the following:
Then choose from the following:
— Target, Peak, and Minimum. Learn more about these standard features
beginning in
— Rise Time
placed at the Peak and at the specified value BEFORE the Peak.
— Fall Time
placed at the Peak and at the specified value AFTER the Peak.
Rise and Fall time in Marker Search uses different criteria than in Auto
Analysis and will therefore result in different reported values.
13-12
Delta Ampl Mkr.
— ON AmplMkr 2 value is relative to AmplMkr 1. When AmplMkr 1 is
moved, AmplMkr 2 also moves to maintain the AmplMkr 2 value
between them.
— OFF The two amplitude markers move independent of one another.
Marker Search.
Zone Search .
— ON Available ONLY when the zoom window is enabled, the search is
limited to the zone defined by the zoom window.
— OFF The search is performed over the entire Tr 1 trace.
"Searching with Markers" on page
Select, then set a value in dB. Delta markers are created and
Select, then set a value in dB. Delta markers are created and
16-7.
Keysight N9912-90001 User's Guide