Table of Contents
Advertisement
File Management
Saving and Recalling Files
Prefixes for Filenames
A prefix is used as a default filename to which characters can be added. The
prefix can be customized, and quickly enabled or disabled. When enabled, the
current prefix is automatically entered as the start of a filename when
performing a Save operation.
How to enable/disable the Prefix (persistent)
— Press Save/Recall 9.
— Then More.
— Then
How to edit the current Prefix
— Press Save/Recall 9.
— Then More.
— Then Prefix.
— Then choose from the following:
How to move the cursor
— Use the rotary knob to move cursor on the same row.
— Use the
When the Prefix is complete
— Press
the FieldFox until it is changed.
— Press
17- 10
Prefix ON
OFF. The current selection is underlined.
——
Select
to add the cursor character to the end of the Prefix.
——
Back Space
to delete the last character(s) from the end of the
prefix.
——Clear
to erase the Prefix.
——The preselected keywords (File, Site, and so forth) can be
selected just like a single character. These keywords can also
be edited. See Edit Keywords.
arrows to move the cursor up and down the rows.
Done
to save the Prefix and close the labeler. This Prefix will exist on
Cancel
to close the labeler without saving changes.
Keysight N9912-90001 User's Guide
Advertisement
Table of Contents
