4.11.4
Dual Image
The Dual Image page allows you to setup an active and backup partitions for
firmware image redundancy.
To access this page, click Tools > Dual Image.
This page is depending on the current model.
The following table describes the items in the previous figure.
Item
Active Image
Save
The ensuing table for Image Information 0/1 settings are informational only: Flash
Partition, Image Name, Image Size and Created Time.
4.11.5
Save Configuration
To access this page, click Tools > Save Configuration.
Click Save Configuration to FLASH to have configuration changes you have made
to be saved across a system reboot. All changes submitted since the previous save
or system reboot will be retained by the switch.
4.11.6
User Account
The User Account page allows you to setup a user and the related parameters.
To access this page, click Tools > User Account.
The following table describes the items in the previous figure.
Item
User Name
Figure 4.138 Tools > Dual Image
Description
Click the format for the image type: EKI-7708E-4F-AE-1-01-01.hex
(Active) or EKI-7708E-4F-AE-1-00-97.hex (Backup).
Click Save to save and keep the new settings.
Figure 4.139 Tools > User Account
Description
Enter the name of the new user entry.
130
EKI-7708 Series User Manual