Dual Image; Save Configuration; User Account; Figure 4.140 Tools > Dual Image - Advantech EKI-7706 Series User Manual

4.11.4

Dual Image

The Dual Image page allows you to setup an active and backup partitions for
firmware image redundancy.
This page is depending on the current model.
The following table describes the items in the previous figure.
Item
Active Image
Save
The ensuing table for Image Information 0/1 lists the following settings
(informational only):
Flash Partition, Image Name, Image Size and Created Time
4.11.5

Save Configuration

To access this page, click Tools > Save Configuration.
Click Save Configuration to FLASH to have configuration changes you have made
to be saved across a system reboot. All changes submitted since the previous save
or system reboot will be retained by the switch.
4.11.6

User Account

The User Account page allows you to setup a user and the related parameters.
To access this page, click Tools > User Account.
The following table describes the items in the previous figure.
Item
User Name
Figure 4.140 Tools > Dual Image
Description
Click the format for the image type: EKI-7706-AE-1-01-01.hex (Active)
or EKI-7706-AE-1-00-97.hex (Backup).
Click Save to save and keep the new settings.
Figure 4.141 Tools > User Account
Description
Enter the name of the new user entry.
132 EKI-7706 Series User Manual