Table of Contents
Advertisement
Figure 86. Connecting the Cables to Server Board the Front Panel Tray in Chassis
8. Install the front bezel. For instructions, see "Removing and Installing the Front Bezel".
9. Install the chassis cover. For instructions, see "Installing the Chassis Cover".
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
Replacing the Front Panel Board
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel".
4.
Remove the front panel tray if it is installed. For instructions, see "Removing the Front Panel Tray".
5.
6.
Loose the screw (see letter A) securing the front panel board and remove the front panel board (see
letter B)
®
Intel
Server Chassis P4000S Service Guide
Hardware Installations and Upgrades
59
Advertisement
Table of Contents
