5.
From inside of chassis, press open the back panel PCI add-in board retentaion device (see letter B).
Figure 73. Open the back panel PCI add-in board retentaion device
6.
Remove the PCI add-in board from its protective wrapper. Be careful not to touch the components or
gold edge connectors. Place the add-in board on an anti-static surface. Record the type and serial
number of the add-in board in your equipment log. Set the jumpers or switches on the board
according to the manufacturer's instructions.
7.
Hold the PCI add-in board by its top edge or upper corners. Firmly press the add-in board into an
expansion slot on the server board (see letter C in the following figure). Close the back panel PCI
add-in card retention device (see letter D).
®
Intel
Server Chassis P4000S Service Guide
Figure 72. Preparing Chassis for Addition of PCI add-in board
Hardware Installations and Upgrades
51