Intel® Server Chassis SC5300 5U Kit TPS
6.
Front Panel
The Server Chassis SC5300 provides a 34-pin cable option with the chassis kit. A 34-pin Entry
Ebay SSI (rev 3.0) front panel header for Intel® server boards is located on the back of the front
panel. This allows for connection of a 34-pin ribbon cable for use with SSI rev 3.0-compliant
server boards. The connector cable is compatible with the 24-pin SSI standard. The front panel
features control buttons and LED indicators. The LEDs are visible with the pedestal exterior
access door closed. The blue ID LED and ID toggle switch featured in the rack mount SC5300
chassis is used to indicate which particular chassis among several in a rack configuration is
being serviced.
6.1
Front Panel Board Layout
6.1.1
Front Panel Connectors
Front Panel connectors are listed in the following table. The I
there are no headers installed at J1 and J2. The front panel SSI connector, JP2, incorporates
both the standard 24-pin SSI front panel signals and the eight LED status signals used by the
Server Chassis SC5300 front panel.
Revision 1.31
Figure 20. Front Panel Primary Side
Figure 21. Front Panel Secondary Side
2
C connectors are not stuffed and
Front Panel
73