Table of Contents
Advertisement
Hardware Installations and Upgrades
Removing and Installing the PCI Card Guide
Removing PCI Card Guide
NOTE
When full length PCI card is plugged, PCI Card Guide is needed to secure the PCI Card.
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
4.
Unplug all the PCI cards if there are PCI cards plugged in. When removing a full-length add-in card,
you must pull back the latch on the plastic card guide at the front of the chassis to release the card
from the card guide. For instructions, see "Removing the PCI Add-in Board(s).
5.
Remove the two screws securing the PCI card guide (See letter A).
6.
Remove the PCI card guide (See letter B and letter C).
Installing PCI Card Guide
NOTE
Required only when full length PCI card is plugged.
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
46
Figure 66. Removing the PCI Guard
®
Intel
Server Chassis P4000S Service Guide
Advertisement
Table of Contents
