2
Before You Begin
Before working with your server product, pay close attention to the Appendix B: Safety
Information.
This document provides instructions for adding and replacing chassis components. For
instructions on replacing components on the server board, such as the processor and memory
DIMMs, see the instructions provided with the server/workstation board.
Tools and Supplies Needed
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
Needle nosed pliers
Anti-static wrist strap and conductive foam pad (recommended)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the
chassis as it would be positioned for normal operation.
®
Intel
Server Chassis P4000S Service Guide
Hardware Installations and
Upgrades
Hardware Installations and Upgrades
13