Hardware Installations and Upgrades
4.
Release the two plastic tabs on the left side of the bezel assembly to disengage the tabs, and rotate
the bezel assembly (see letter A) no more than 40 degrees outward.
5.
At a 40-degree angle, push the bezel assembly away from the chassis (see letter B).
6.
If the bezel assembly does not immediately disconnect from the chassis, tap the left-hand side of the
bezel assembly to disengage the bezel hooks on the right-hand side of the chassis.
Installing the Front Bezel
1.
Fit the right edge of the bezel assembly against the right side of the chassis.
2.
Engage the plastic bezel hooks (see letter A) into the raised metal slots at the chassis edge.
3.
Rotate the bezel assembly toward the chassis.
4.
Latch the two plastic tabs (see letter B) on the left side of the bezel assembly to the chassis.
16
Figure 16. Removing the Front Bezel
Figure 17. Installing the Front Bezel
®
Intel
Server Chassis P4000S Service Guide