Installing The Power Interposer Board; 3.12 Replacing The Front Control Panel Board; Removing The Front Control Panel Board; Figure 58. Installing The Power Interposer Board - Intel H2000G series Service Manual

3.11.2

Installing the Power Interposer Board

Place the power interposer board into the compute module (A), rotate the bracket counterclockwise all the
way (B), and tighten the screw (C) as pictured in Figure 59.

3.12 Replacing the Front Control Panel Board

3.12.1

Removing the Front Control Panel Board

1. Remove the four screws on the back of the rack handle (A) as pictured in Figure 60. Be careful of the front
panel cable on the back.
Figure 60. Removing the front control panel assembly from the rack handle
2. Disconnect the cable from the front control panel board (B) as pictured in Figure 61.
Intel® Server Chassis H2000G Product Family Service Guide
Figure 59. Installing the power interposer board
Figure 61. Disconnecting the front panel cable
B
39