8.
Insert the HDD carrier tray into chassis.
9.
Connect power and data cables on HDD.
10. Install the Fixed HDD EMI shield. For instructions, see "Installing the Fixed HDD EMI Shield".
11. Install the front bezel. For instructions, see "Installing the Front Bezel".
12. Install the air duct if the air duct is removed. For instructions, see "Installing the Airduct"
13. Install the chassis cover. For instructions, see "Installing the Chassis Cover".
14. Plug all peripheral devices and the AC power cable into the server.
15. Power up the server.
®
Intel
Server Chassis P4000S Service Guide
Figure 30. Securing the 2.5'' HDD on Fixed HDD Carrier Tray
Figure 31. Inserting the HDD Carrier Tray
Hardware Installations and Upgrades
23