Installing Fixed Hard Drive(S); Figure 26. Removing The 2.5'' Hdd From Fixed Hdd Tray; Figure 27. Reinstalling The Hdd Carrier Tray - Intel P4000S Series Service Manual

9. Reinstall the HDD carrier tray into chassis.
10. Install the Fixed HDD EMI shield. For instructions, see "Installing the Fixed HDD EMI Shield".
11. Install the front bezel. For instructions, see "Installing the Front Bezel".
12. Install the air duct if the air duct is removed. For instructions, see "Removing the Airduct".
13. Install the chassis cover. For instructions, see "Installing the Chassis Cover".
14. Plug all peripheral devices and the AC power cable into the server.
15. Power up the server.

Installing Fixed Hard Drive(s)

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
®
Intel Server Chassis P4000S Service Guide

Figure 26. Removing the 2.5'' HDD from Fixed HDD tray

Figure 27. Reinstalling the HDD Carrier Tray

Hardware Installations and Upgrades
21