Hardware Installations and Upgrades
Removing and Installing Fixed Hard Drive(s)
NOTE
This procedure applies only to the Intel
Removing Fixed Hard Drive(s)
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel".
4.
Remove the Fixed HDD EMI shield. For instructions, see "Removing the Fixed HDD EMI Shield".
5.
6.
Remove power and data cables from the hard drive connectors.
7.
Pull out the HDD carrier tray.
8.
Use screwdriver to release the 3.5'' or 2.5'' HDD from the carrier tray.
20
®
Server Chassis P4000S family with fixed HDD configuration.
Figure 24. Removing Fixed Hard Drives
Figure 25. Removing the 3.5'' HDD from Fixed HDD tray
®
Intel
Server Chassis P4000S Service Guide