Figure 60. Securing The Bracket Into Power Supply Cage; Figure 61. Installing Hot-Swap Power Supply Module Into Chassis - Intel P4000S Series Service Manual

Hardware Installations and Upgrades

Figure 60. Securing the Bracket into Power Supply Cage

13. Reconnect the power cables as appropriate.
14. Insert the power supply(s) into the power supply cage and push all the way until it clicks into place.

Figure 61. Installing Hot-swap Power Supply Module into Chassis

15. Reinstall the air duct. For instructions, see "Installing the Airduct".
16. Re-install the chassis cover. For instructions, see "Installing the Chassis Cover'.
17. Plug all peripheral devices and the AC power cable into the server.
18. Power up the server.
®
Intel Server Chassis P4000S Service Guide 41