Installing Non-Full Length Pci Add-In Board(S) For P4304Xxsfen/P4304Xxshen/P4304Xxsfdr/P4304Xxshdr/P4304Xxs Fdn/P4304Xxhdn; Figure 71. Installing Pci Add-In Board - Intel P4000S Series Service Manual

Hardware Installations and Upgrades
9. Attach cables if necessary.
10. Install the chassis cover. For instructions, see "Installing the Chassis Cover".
11. Plug all peripheral devices and the AC power cable into the server.
12. Power up the server.
Installing non-Full Length PCI Add-in Board(s) for
P4304XXSFEN/P4304XXSHEN/P4304XXSFDR/P4304XXSHDR/P
4304XXSFDN/P4304XXHDN
CAUTION
You may want to install an operating system before installing any add-in boards.
Do not overload the server board by installing add-in boards that draw excessive current.
Add-in boards can be extremely sensitive to ESD and always require careful handling. After
removing the board from its protective wrapper, place it component side up on a grounded, static-
free surface. Do not slide the board over any surface.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
4. Remove the PCI slot shield (see letter A) by pushing from the shield out from inside the chassis.
50

Figure 71. Installing PCI Add-in Board

®
Intel Server Chassis P4000S Service Guide