Hardware Installations and Upgrades
Installing the Front Fixed Fan
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
3.
Remove the airduct if it is installed. For instructions, see "Removing the Airduct".
4.
5.
While holding the rear vent cover and fan, insert the sleeves of the nylon rivet into the rivet. Push the
nylon push-pins of the nylon rivet into the sleeves (see letter A and B).
6.
Align the fan assembly with the two screw-holes insdie the chassis and secure the fan assembly with
the screws (see letter C).
44
Figure 64. Removing the Front Fixed Fan
®
Intel
Server Chassis P4000S Service Guide