Figure 42. Breaking Off The Tab On The Bracket; Figure 43. Installing 2.5" Hdd Interface Bracket Into Carrier - Intel P4000S Series Service Manual

3. Install the 2.5" Hard Drive Interface Bracket from top. Secure the bracket using the same screws as
shown.
4. Slide the 2.5" HDD into the bracket to align the screw holes with the right and left rail (See figure D).
Secure the hard disk drive using the screws for the 2.5'' HDD (See figure E).
®
Intel Server Chassis P4000S Service Guide

Figure 42. Breaking off the tab on the bracket

Figure 43. Installing 2.5" HDD interface bracket into Carrier

Hardware Installations and Upgrades
31