2.
Reconnect power cables to other chassis components as appropriate.
Install the chassis cover. For instructions, see "Installing the Chassis Cover".
3.
4.
Plug all peripheral devices and the AC power cable into the server.
5.
Power up the server.
Installing an Additional Hot-swap Power Supply
Module
NOTE
This install procedure only applies to a chassis with redundant power supply capability.
WARNING
Hazardous voltage, current, and energy levels are present inside the power supply. There are no
user-serviceable parts inside it; servicing should be done by technically qualified personnel.
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Insert finger into finger hole in middle of filler panel and remove the filler panel from chassis.
®
Intel
Server Chassis P4000S Service Guide
Figure 48. Installing Fixed Power Supply
Hardware Installations and Upgrades
35