Table of Contents
Advertisement
Enter/Exit Programming Mode
China Sensible Code
Specifies one of the bar code lengths for
length if in
Variable Length
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See
page 217
for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
180
Set Length 1
China Sensible Code Length
Mode, or the first fixed length if in Fixed Length Mode. Characters can be set from
DEFAULT
Control. Length 1 is the minimum label
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
0001 = Length 1 is 1 Character
representing your
CANCEL
QuickScan™ I QD24XX
Advertisement
Table of Contents
