Enter/Exit Programming Mode
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to the center of the aiming pattern. This
allows the reader to accurately target labels when they are placed close together, such as on a pick sheet.
This feature is not compatible with Multiple Labels Reading in a Volume.
$CSNPM01(CR)
Pick Mode = Enable
Stand Mode Sensitivity
Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.
$CSMSE01(CR)
Stand Mode Sensitivity = Medium
72
DEFAULT
$CSNPM00(CR)
Pick Mode = Disable
$CSMSE00(CR)
Stand Mode Sensitivity = Low
DEFAULT
$CSMSE02(CR)
Stand Mode Sensitivity = High
QuickScan™ I QD24XX