China Sensible Code Set Length 1 - Datalogic Gryphon Series Product Reference Manual

Enter/Exit Programming Mode
China Sensible Code
Specifies one of the bar code lengths for
minimum label length if in
Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See page 265
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
208
Set Length 1
Variable Length
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
China Sensible Code Length
Mode, or the first fixed length if in Fixed Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
Gryphon™ I GD44XX/GBT4400/GM440X
China Sensible Code
Control. Length 1 is the
representing your