Code 11 Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

Code 11 Set Length 1

This feature specifies one of the bar code lengths for
length if in Variable Length
check and data characters. The length can be set from 2 to 50 characters.
Table 15 provides some examples for setting Length 1. See
Table 15. Code 11 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode, or the first fixed length if in
02 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 11 LENGTH 1 SETTING
'0' and '2'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 11 Length Control. Length 1 is the minimum label
Fixed Length
page 217 for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
04 = Length 1 is 4 Characters
Enter/Exit Programming Mode
Mode. Length includes the bar code's
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
149