Code 11 Check Character Transmission; Code 11 Length Control - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Code 11 Check Character Transmission

This feature enables/disables transmission of an optional Code 11 check character.
$CC1CT00(CR)
Code 11 Check Character Transmission = Don't Send
$CC1CT01(CR)
DEFAULT
Code 11 Check Character Transmission = Send

Code 11 Length Control

This feature specifies either variable length decoding or fixed length decoding for the Code 11 symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
$CC1LC00(CR)
DEFAULT
Code 11 Length Control = Variable Length
$CC1LC01(CR)
Code 11 Length Control = Fixed Length
QuickScan™ I QD24XX
148