Gs1 Databar™ Expanded Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the bar code lengths for
minimum label length if in
includes the bar code's data characters only. The length can be set from 1 to 74 characters.
Table 17 provides some examples for setting Length 1. See
Table 17. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CXBL1
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length Mode, or the first fixed length if in
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
GS1 DataBar™ Expanded Length
page 217 for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Enter/Exit Programming Mode
Control. Length 1 is the
Fixed Length Mode. Length
52 Characters 74 Characters
'5' and '2' '7' AND '4'
CANCEL
155