Global Interface Features; Host Commands - Obey/Ignore; Usb Suspend Mode - Datalogic QuickScan I QD24 Series Product Reference Manual

The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set to ignore, the reader will
ignore all host commands except for those necessary for:
• service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
DEFAULT
$CIFIH01(CR)
Host Commands = Ignore

USB Suspend Mode

This setting enables/disables the ability of USB interfaces to enter suspend mode.
DEFAULT
$CUSSE01(CR)
USB Suspend Mode = Enable
Product Reference Guide

GLOBAL INTERFACE FEATURES

Enter/Exit Programming Mode
$CIFIH00(CR)
Host Commands = Obey
(Do Not Ignore Host Commands)
$CUSSE00(CR)
USB Suspend Mode = Disable
17