China Sensible Code Set Length 1; China Sensible Code Set Length 2 - Datalogic PowerScan PBT950X Product Reference Manual

2D Global Features

China Sensible Code Set Length 1

Specifies one of the bar code lengths for
trol. Length 1 is the minimum label length if in
first fixed length if in Fixed Length Mode. Characters can be set from 0001
to 7,827 characters in increments of 0001 (pad with zeroes).
See page 281
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

China Sensible Code Set Length 2

This feature specifies one of the bar code lengths for
Length
Mode, or the second fixed length if in Fixed Length Mode. Characters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 282
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Control. Length 2 is the maximum label length if in Variable Length
for detailed instructions on setting this feature.
Length 2 is 7,827 Characters
DEFAULT
Enter/Exit Programming Mode
China Sensible Code Length Con-
Variable Length
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
Mode, or the
repre-
China Sensible Code
repre-
181