China Sensible Code Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

China Sensible Code Set Length 1

Specifies one of the bar code lengths for
trol. Length 1 is the minimum label length if in
first fixed length if in Fixed Length Mode. Characters can be set from 0001
to 7,827 characters in increments of 0001 (pad with zeroes).
See page 267
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
180
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
China Sensible Code Length Con-
Variable Length
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
2D Global Features
Mode, or the
repre-