Datalogic QuickScan I QD24 Series Product Reference Manual page 26

Enter/Exit Programming Mode
3. If additional input parameters are needed, go to
from the keypad.
Additional information about many features can be found in the "References" chapter.
If you make a mistake before the last character, scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
4. Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar code to exit
Programming Mode.
For more detailed descriptions, programming information and examples for setting selected configuration items,
see References, starting on page
By default, the handheld will decode bar code labels only when they are close to the center
of the aiming pattern. This allows the handheld to accurately target labels when they are
placed close together, such as on a pick sheet. See
16
Appendix D,
205.
Keypad, and scan the appropriate characters
Pick Mode, starting on page
QuickScan™ I QD24XX
72.