Individually Set Label Id; Label Id Control - Datalogic QuickScan I QD24 Series Product Reference Manual

Individually Set Label ID

This feature configures a Label ID individually for a single symbology. To set, first define whether you want it as a
prefix or suffix by scanning a label below. Then turn to
on page 54 to select the symbology you want to set, followed by up to 3 characters from the ASCII Chart at the
back of this manual. See
setting this feature.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbology type.
DEFAULT
$CIDCO01(CR)
Label ID Transmission = Enable as Prefix
Product Reference Guide
"Label ID: Set Individually Per Symbology" on page 224
Enter/Exit Programming Mode
Label ID Symbology Selection • 1D Symbologies, starting
$CIDCO00(CR)
Label ID Transmission = Disable
$CIDCO02(CR)
Label ID Transmission = Enable as Suffix
for detailed instructions on
53