Led And Beeper Indications - Datalogic QuickScan I QD24 Series Product Reference Manual

General purpose handheld area imager bar code reader
Table of Contents

Advertisement

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to indicate various functions or errors on the
reader. An optional "Green Spot" also performs useful functions. The tables below list these in-
dications. One exception to the behaviors listed in the tables is that the reader's functions are pro-
grammable, and may or may not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming bar code labels.
Table 47.
INDICATION
The reader is in the process of
Power-up Beep
powering-up.
A label has been successfully
Good Read Beep
scanned by the reader.
There is an error in the reader's
ROM Failure
software/programming
Indicates that a host connection
Limited Scanning
is not established when the IBM
Label Read
or USB interface is enabled.
Reader Active
The reader is active and ready to
Mode
scan.
Reader
The reader has been disabled by
Disabled
the host.
While in Stand Mode or Trigger
Green Spot is on
Stand Mode the green spot shall
continuously
be on while in stand watch state.
Upon successful read of a label,
a
Green Spot
the software shall turn the green
flashes momen-
spot on for the time specified by
tarily
the configured value.
Image Capture
When ready to capture image
a. Except when in sleep mode or when a
Product Reference Guide
LED and Beeper Indications
DESCRIPTION
Good Read LED Duration
LED
LED behavior for this indi-
cation is configurable via
the feature
Good Read:
When to Indicate
Flashes
N/A
a
The LED is lit steadily
The LED blinks continu-
ously
N/A
N/A
Blue light flashes 2 times
when updating
other than 00 is selected
Technical Specifications
BEEPER
Reader beeps four times at high-
est frequency and volume upon
power-up.
The reader will beep once at cur-
rent frequency, volume, mono/
bi-tonal setting and duration
upon a successful label scan.
Reader sounds one error beep at
highest volume.
Reader 'chirps' six times at the
highest frequency and current
volume.
N/A
N/A
N/A
N/A
N/A
243

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quickscan qd2400

Table of Contents