Multiple Labels Ordering By Code Symbology; Multiple Labels Ordering By Code Length - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted by symbology type, when Multiple
Labels per Frame is enabled. See
$CSNMS
Select Symbologies for Multiple Labels Ordering
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
$CSNMT01(CR)
Transmit Increasing Length Order
80
page 234 in "References" for detailed information on setting this feature.
DEFAULT
DEFAULT
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits From the alphanumeric characters In
Appendix d, keypad representing your desired Charac-
ter(s). end by scanning the enter/exit bar code again.
~
000000000000 = Random order
$CSNMT00(CR)
Multiple Labels Ordering = Disable
$CSNMT02(CR)
Transmit Decreasing Length Order
CANCEL
QuickScan™ I QD24XX