Code 128 Set Length 2 - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 2

This feature specifies one of the bar code lengths for
length if in Variable Length
code's data characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table 6 provides examples for setting Length 2. See
Table 6. Code 128 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
.
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
118
Mode, or the second fixed length if in
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 128 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 128 Length Control. Length 2 is the maximum label
Fixed Length
page 217 for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
80 = Length 2 is 80 Characters
Mode. Length includes the bar
15 Characters 80 Characters
'1' and '5' '8' and 0'
CANCEL
QuickScan™ I QD24XX