Partial Label Reading Control; Decode Negative Image; Image Capture - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Partial Label Reading Control

Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
IPPL00
Partial Label Reading Control = Disable

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies. When this feature is enabled, you will be
unable to read normally-printed labels or programming labels in this manual. Scan the "Disable" bar code below to
return the scanner to its default for this feature. To set decoding for only 2D codes, go to
Symbol Control" on page
Unlike some programming features and options, Decode Negative Image selections require that
you scan only one programming bar code label. DO NOT scan an ENTER/EXIT bar code prior to
scanning a Decode Negative Image bar code.
When this feature is enabled, you will be unable to read other programming labels in this manual.
CAUTION
$P,CIPVR00,P(CR)
Decode Negative Image = Disable

Image Capture

For information and a list of options for Image Capture, use the Datalogic Aladdin configuration application,
available for free download from the Datalogic Scanning website. NOTE: This feature is not supported by the
QD24XX model.
78
175. For additional options, see the Aladdin configuration application.
IPPL01
Partial Label Reading Control = Enable
DEFAULT
$P,CIPVR01,P(CR)
Decode Negative Image = Enable
"2D Normal/Inverse
QuickScan™ I QD24XX