Manual Clutch Screws - Konica Minolta mKDR Xpress Operation

3.6.1.3

MANUAL CLUTCH SCREWS

1. Sticker with instructions
2. Separating Plate (Back Holder)
3. Tools Support
(situation inside the unit)
4. Magnetic Hubcap
Sticker
Separating
Plate
OM-0481R1
When the unit has to be moved manually, the (x2) Clutch Screws (Allen type)
located on each wheel must be removed using the tools provided with the unit.
DRIVE THE UNIT MANUALLY ONLY WHEN MOTORIZED
MOTIONS CANNOT BE PERFORMED (DUE TO A SYSTEM
MALFUNCTION OR THE BATTERIES DISCHARGE).
IN THIS CASE, DO NOT DRIVE THE UNIT ON SLOPES OR
INCLINED SURFACES;
SURFACES, TO AVOID PERSONAL INJURIES OR DAMAGE
TO EQUIPMENT DUE TO ITS HEAVY WEIGHT.
Dismount the Separating Plate of the Back Holder, in order to gain access

to the Tools Holder mounted inside of the Unit.
Take both tools from the holder.

Use the Wedge tool to dismount the magnetic Hubcap.

DRIVE IT
1
2
4
3
Mobile X-ray Unit
Operation
ONLY ON LEVEL
1
3
Tools
73