Table of Contents
Advertisement
Mobile X-ray Unit
Operation
C.2.2
ADMINISTRATOR MENU CONTROLS
.
Note
C-6
The following options are displayed in Administrator Menu main screen:
OPERATOR SETTINGS
Refer to Section C.2.3.
Press the "Operator Settings" button to display the configurations related to the
system operation.
MAINTENANCE
Refer to Section C.2.4.
Press the "Maintenance" button to access to the equipment maintenance
information.
The following icons and buttons can be displayed in the Administrator Menu
main screen:
ENABLED FILAMENTS
This button indicates that filaments are enabled; radiation will be produced
during the exposure. Press on this icon to disable filaments.
DISABLED FILAMENTS
This button indicates that filaments are disabled; no radiation will be produced
during the exposure. Press on this icon to enable filaments.
BACK
Press on the "Back" button to leave the current menu. This button can be found
in every screen of the Administrator Menu to turn back to the Main Menu.
Every time the "Back" button is used to leave the Administrator
Settings Menu, after making configuration changes, the System
requires a reboot to transfer the new data.
Press this button from the main menu window to return to the Control Console
in operation mode.
Appendix C
Advertisement
Table of Contents
