Emergency Stop; System On/Off Routine - Konica Minolta mKDR Xpress Operation

Mobile X-ray Unit
Operation
3.2.3

EMERGENCY STOP

.
Note
3.2.4

SYSTEM ON/OFF ROUTINE

.
Note
54
In the event of an emergency, the unit is turned OFF by forcibly pressing this
switch (red mushroom-shaped switch). The switch is protected by the Cover,
in order to prevent it from being accidentally pressed.
The Emergency Stop must not be used to switch OFF the unit, in order to avoid
damaging the software.
Whenever possible, turn OFF the system as indicated in Section
3.2.2 in order to turn it OFF safely.
After turning the unit ON as described in Section 3.2.1, Konica-Minolta "Ultra"
Software Application is launched on the Control Console.
The user provided with RFID Card for Smart ON/OFF system, with
permission for Radiographic operation (refer to Section 3.2.1.1),
has direct access to the radiographic operation.
Turn OFF the system as described in Section 3.2.2.
OM-0481R1